Data Sheets

Stainless Steel - Austenitic - 2S130D - AMS5646

2S130D - AMS5646

S130 is an austenitic chromium-nickel stainless steel. The additional niobium stabilises the alloy overcoming the risk of corrosion common to other stainless steel grades exposed to high welding temperatures. The steel is produced by an electric melting process and also conforms to the requirements of BS S100. The alloy is non-magnetic and cannot be hardened by heat treatment. Typical applications are within the aerospace industry where corrosive conditions are severe, such as aircraft exhaust stacks, manifolds and ring collectors.


Chemical Composition

Spec:

Chemical Element % Present
Carbon (C) 0.0 - 0.08
Nickel (Ni) 9.00 - 11.00
Manganese (Mn) 0.50 - 2.00
Phosphorous (P) 0.0 - 0.04
Sulphur (S) 0.0 - 0.25
Silicon (Si) 0.0 - 0.75
Niobium (Columbium) (Nb) 0.0 - 1.10
Molybdenum (Mo) 0.0 - 1.00
Chromium (Cr) Balance

Properties

Physical PropertyValue
Density 7.8 g/cm³

Spec: ASTM A240

Sheet -

Mechanical PropertyValue
Proof Stress 210 MPa
Tensile Strength 540 MPa
Elongation A50 mm 35 %
Hardness Brinell 255 HB

Alloy Designations

AISI 347

UNS S34700 in ASTM A276 & A479

AMS 5646


Supplied Forms

  • Sheet
  • Bar
  • Forgings
  • Pipe
  • Rod
Download PDF Version

Datasheet Search

Last Datasheet Revision

22 July 2016

Disclaimer

This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary widely with temper, product and product dimensions. All information is based on our present knowledge and is given in good faith. No liability will be accepted by the Company in respect of any action taken by any third party in reliance thereon.

Please note that the 'Datasheet Update' date shown above is no guarantee of accuracy or whether the datasheet is up to date.

The information provided in this datasheet has been drawn from various recognised sources, including EN Standards, recognised industry references (printed & online) and manufacturers’ data. No guarantee is given that the information is from the latest issue of those sources or about the accuracy of those sources.

Material supplied by the Company may vary significantly from this data, but will conform to all relevant and applicable standards.

As the products detailed may be used for a wide variety of purposes and as the Company has no control over their use; the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or fitness for any particular purpose, whether expressed or implied.

Advice given by the Company to any third party is given for that party’s assistance only and without liability on the part of the Company. All transactions are subject to the Company’s current Conditions of Sale. The extent of the Company’s liabilities to any customer is clearly set out in those Conditions; a copy of which is available on request.