Data Sheets

Copper and Copper Alloys - B150 C63200

B150 C63200

Aluminium Bronze ASTM B150 - C63200 is a strong, corrosion resistant material that performs well at high and low temperatures. It also has a low magnetic permeability, making it ideal for use on instrumentation systems, seawater piping systems and marine propulsion units.
Typical uses of C63200 incluse Bearing Cages, Sleeve Bearings, Valve Stems, Shafts, Cams, Sea Water Valves, Sea Water Pump Bodies, Bushings.


Chemical Composition

Spec:

Chemical Element % Present
Iron (Fe) 3.50 - 4.30
Manganese (Mn) 0.0 - 0.02
Aluminium (Al) 8.70 - 9.50
Nickel (Ni) 4.00 - 4.80
Silicon (Si) 0.0 - 0.10
Lead (Pb) 0.0 - 0.02
Copper (Cu) Balance

Properties

Physical PropertyValue
Density 7.58 g/cm³
Melting Point 1041-1060 °C

Spec:

-

Mechanical PropertyValue
Elongation A50 mm 22 %
Hardness Rockwell B 94 HRB
Tensile Strength 680 MPa

Supplied Forms

  • Bar
  • Forgings
  • Rod
  • Plate
Download PDF Version

Datasheet Search

Last Datasheet Revision

22 July 2016

Disclaimer

This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary widely with temper, product and product dimensions. All information is based on our present knowledge and is given in good faith. No liability will be accepted by the Company in respect of any action taken by any third party in reliance thereon.

Please note that the 'Datasheet Update' date shown above is no guarantee of accuracy or whether the datasheet is up to date.

The information provided in this datasheet has been drawn from various recognised sources, including EN Standards, recognised industry references (printed & online) and manufacturers’ data. No guarantee is given that the information is from the latest issue of those sources or about the accuracy of those sources.

Material supplied by the Company may vary significantly from this data, but will conform to all relevant and applicable standards.

As the products detailed may be used for a wide variety of purposes and as the Company has no control over their use; the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or fitness for any particular purpose, whether expressed or implied.

Advice given by the Company to any third party is given for that party’s assistance only and without liability on the part of the Company. All transactions are subject to the Company’s current Conditions of Sale. The extent of the Company’s liabilities to any customer is clearly set out in those Conditions; a copy of which is available on request.