Copper and Copper Alloys - B150 C63000

B150 C63000

B150 C63000 offers an array of properties including; high strength and hardness, excellent resistance to wear, shock and abrasion.
The C63000 / AMS4640 can also offer additional properties including good erosion, corrosion and cavitation resistance in seawater, as well as resistance to dilute sulphuric, hydrochloric and non-oxidising acids.

Typical applications for the include aerospace landing gear components, marine fasteners, hardware and fittings, thrust washers, gears, control bushes, valve spindles and components, faucet balls, springs & worm wheels, Non-sparking safety tooling, wear plates, valve stems and seats, welding clamps, fasteners and bearing bushes.

Chemical Composition


Chemical Element % Present
Iron (Fe) 2.00 - 4.00
Manganese (Mn) 0.0 - 1.50
Aluminium (Al) 9.00 - 11.00
Nickel (Ni) 4.00 - 5.50
Silicon (Si) 0.0 - 0.25
Tin (Sn) 0.0 - 0.20
Zinc (Zn) 0.0 - 0.30
Copper (Cu) Balance


Physical PropertyValue
Density 7.58 g/cm³
Melting Point 1035-1054 °C
Thermal Conductivity 38-46 W/m.K
Electrical Resistivity 7-9 % IACS



Mechanical PropertyValue
Elongation A50 mm 10 %
Hardness Rockwell B 180-240 HRB

Alloy Designations

AMS 4640

UNS C63000


BSEN12163: CW307G

Supplied Forms

  • Bar
  • Forgings
  • Rod
Download PDF Version

Datasheet Search

Last Datasheet Revision

22 July 2016


This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary widely with temper, product and product dimensions. All information is based on our present knowledge and is given in good faith. No liability will be accepted by the Company in respect of any action taken by any third party in reliance thereon.

Please note that the 'Datasheet Update' date shown above is no guarantee of accuracy or whether the datasheet is up to date.

The information provided in this datasheet has been drawn from various recognised sources, including EN Standards, recognised industry references (printed & online) and manufacturers’ data. No guarantee is given that the information is from the latest issue of those sources or about the accuracy of those sources.

Material supplied by the Company may vary significantly from this data, but will conform to all relevant and applicable standards.

As the products detailed may be used for a wide variety of purposes and as the Company has no control over their use; the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or fitness for any particular purpose, whether expressed or implied.

Advice given by the Company to any third party is given for that party’s assistance only and without liability on the part of the Company. All transactions are subject to the Company’s current Conditions of Sale. The extent of the Company’s liabilities to any customer is clearly set out in those Conditions; a copy of which is available on request.